pool start up instructions

Alan Smith Pool Plastering walk us through how to properly Start Up a newly resurfaced pool. 1 Test the pool water for pH alkalinity calcium hardness and metals.

Startup Tec Technical Guidelines Mcgrayel Co Easy Care Products

Test fill water for pH alkalinity calcium hardness and metals.

. Do not let the water run over the spa spillway or overflow and run. Vacuums or wheeled pool cleaners should not be used in the. 2nd Day Test pH Alkalinity and Calcium Hardness and repeat steps of 1st day except for step 6.

Add twenty 20 ounces of Back Up Algae Inhibitor or twenty 20 ounces of Algae All if using Nature 2. Record results repeat steps 2 and 3 from Day One. Start-Up Instructions for Frog Pool Tender.

This is an essential step in the pool plastering process. Once the alkalinity is adjusted to 70 ppm and the pH is adjusted to 72 to 76 then adjust. Dont backwash or turn off the pump for twenty-four 24.

Add one and one-half 1 12 pounds of Stabi-lizer 100 and pour slowly down the skimmer. Turn on your Saltwater. Do not allow any external sources of water to enter the pool to help prevent streaking.

Once the Total Alkalinity has been adjusted to 80 PPM and the pH. Start-Up Instructions for Chlorinated Pools. Test for Alkalinity pH Calcium and Metals Test 3 to 4 hours after pool has been.

Test the pH a minimum of. 2 Adjust Total Alkalinity to 80 PPM adjust with Sodium Bicarbonate baking soda if its low or add. Add Leslies Stain Scale Prevent Start-Up.

Start-Up Instructions for Pool Frog Leap System. Test the pH and adjust. Start-Up Instructions for Saltwater Pools.

Method 1 As the pool is filling Use the Orenda Startup Barrel to add calcium and chelating agent Spa. ____ Step 6. Turn on your filter system and add the correct amount of saltto the water for your pool size.

Do not allow any external sources of water to enter the pool to help prevent streaking. INSTRUCTIONS FOR POOL START UP 2. Brush the entire pool surface thoroughly at least twice daily to remove a Wheeled ll plaster dust.

Operate pump and filter 24 hours per day 2. 28-DAY START UP INSTRUCTIONS DAY ONE FIRST VISIT 1. Add cyanuric acid water stabilizer to the skimmer and let it work into the.

Test fill water for pH alkalinity calcium hardness and metals. Once the pool is full turn on the pump there will be air in the system so the pump basket may need to be primed. Add water to the pool until it reaches its normal level.

Prime the pump and then turn on the circulation and filtration system. DAILY WEEKLY BI-WEEKLY. Steps to Open your Swimming Pool Step 1.

Test the pool water for pH alkalinity calcium hardness.

Baquacil Cdx System Startup Kit Supreme Spa Pool